Infection can develop around the plates, screws and nails used to fix a fracture. We explain the early and late warning signs of fracture-related infection, how it is diagnosed and how it is treated.
On this page 8 sections
- What is a fracture-related infection and why does it happen?
- What are the warning signs of a fracture-related infection?
- How is a fracture-related infection diagnosed?
- How is a fracture-related infection treated?
- How does infection affect fracture healing?
- How can the risk of infection be reduced?
- When should you see a doctor?
- Key points
A fracture-related infection is an infection of the bone and of the plates, screws or nails used to fix a broken bone. It may appear in the first weeks after surgery as wound discharge, redness and fever, or it may emerge months or even years later as increasing pain, a small draining opening in the skin, or a fracture that fails to heal. When it is recognised early, more treatment options are available; diagnosis and treatment are planned through examination, blood tests, imaging and deep tissue samples.
The large majority of fracture operations heal without infection. The risk is higher after open fractures, where the skin has been broken, after injuries with severe soft-tissue damage and in people with certain other health conditions. This article aims to help you recognise the warning signs and understand what treatment may involve.
What is a fracture-related infection and why does it happen?
Bacteria usually reach the fracture at the time of injury (especially in open fractures) or during surgery, and less often through the bloodstream. Bacteria that attach to the surface of a metal implant gradually build a sticky protective layer around themselves called a biofilm. Within a biofilm, bacteria are largely shielded from both the immune system and antibiotics. This is why an established implant infection is usually treated with surgical cleaning as well as antibiotics, rather than with antibiotics alone. Staphylococci are the most common organisms, although other bacteria can also be responsible.
The main factors that increase the risk are:
- open fractures and severe soft-tissue damage
- smoking
- poorly controlled diabetes, obesity and poor nutrition
- conditions or treatments that suppress the immune system
- long or repeated operations
- poor blood supply to the area
Some of these, such as smoking and blood sugar control, are factors that you can change yourself.
Pin-site infection, which is common in people with external fixators, is usually superficial and can often be controlled by adjusting pin care and with treatment advised by the doctor. Discharge that persists around a pin, a pin that loosens or increasing pain may suggest that infection has spread deeper into the bone, and needs separate assessment.
What are the warning signs of a fracture-related infection?
The signs can differ depending on when the infection develops. In the first weeks after surgery, look out for:
- redness, warmth and swelling spreading around the wound
- wound discharge that continues beyond the first few days, or becomes cloudy or pus-like
- the wound opening up
- fever, shivering and feeling unwell
- pain that increases when it should be settling
Late infections can be more subtle: persistent or returning pain at the fracture, a small opening in the skin that drains on and off (a sinus), recurrent swelling, a fracture that does not heal in the expected time, or loosening of the implant.
| Timing (approximate) | Typical picture | General direction of treatment |
|---|---|---|
| Early (first 2 weeks) | Wound discharge, redness, fever | In suitable cases, debridement with the implant retained |
| Delayed (about 2–10 weeks) | Ongoing discharge, increasing pain, slow healing | Retention or exchange depending on implant stability |
| Late (after 10 weeks) | Sinus, non-union, loose implant | Often exchange or removal of the implant |
These time frames are only a guide. What matters most is how mature the biofilm is, whether the fracture has healed, whether the implant is stable and the condition of the soft tissues.
How is a fracture-related infection diagnosed?
Under international consensus definitions, certain findings confirm infection: a sinus or wound breakdown connecting to the bone or implant, pus at the site, the same organism grown from separate deep tissue samples, and organisms seen on tissue examination. Clinical signs such as redness, swelling and pain, X-ray changes such as bone loss around the implant or loosening, and raised inflammatory markers in the blood (CRP, ESR, white cell count) are suggestive findings that support the diagnosis. Normal blood tests do not rule infection out. Examination looks at the appearance of the wound, any sinus and any movement at the fracture, and previous operation notes and details of the implants used are also important for decision-making.
- Imaging: X-rays and CT; in selected cases MRI, or nuclear medicine tests such as labelled white cell scans and PET-CT.
- Sampling: several deep tissue samples are taken during surgery. A surface swab of the discharge may be misleading. Removed implants can be analysed with specialised methods.
- Antibiotic timing: the treating team decides whether antibiotics should be started before samples are taken. It is important not to start or stop antibiotics without medical advice.
How is a fracture-related infection treated?
Treatment calls for a team approach, bringing together orthopaedic surgeons, infectious disease specialists, microbiologists and, when needed, plastic surgeons. The core principles are surgical removal of infected and dead tissue (debridement), stable fixation of the fracture, local antibiotic carriers where appropriate, a course of antibiotics guided by culture results that often lasts several weeks, and healthy soft-tissue cover.
Decisions about the implant depend on how long the infection has been present, whether the implant is stable and whether the fracture has healed:
- Retaining the implant: early on, if the implant is stable and the fracture has not yet healed, it may be kept in place with debridement and antibiotics.
- Exchanging the implant: if the implant has loosened or broken, or the infection is established, it is removed and new fixation is applied in one or two stages. Ilizarov-type external fixators are often used during this phase.
- Removing the implant: once the fracture has healed, the implant can be removed to take away the surface on which the biofilm lives.
If a gap in the bone remains after debridement, reconstruction methods such as bone transport or the Masquelet technique are considered. These are described on our complex and infected non-union page.
For the patient, treatment may involve one or more operations, a hospital stay while antibiotics are started, regular wound care and, in some cases, supportive methods such as negative-pressure (vacuum) wound therapy. After discharge, taking antibiotics exactly as planned, keeping up with blood tests and follow-up visits, and maintaining joint movement with physiotherapy are all important parts of recovery.
How does infection affect fracture healing?
Infection is one of the important causes of fractures failing to unite. It disrupts the biology of bone healing, while movement at the fracture makes it easier for infection to persist. Treatment therefore tackles both problems together: controlling the infection and creating a stable environment in which the bone can heal. Even after the infection is under control, bone healing can take months, and this phase is followed with regular X-rays. Our bone and soft tissue infections page explains the general approach, and our article on whether surgery is needed in bone infections discusses how that decision is made.
How can the risk of infection be reduced?
The risk cannot be removed entirely, but both the hospital team and patients can take steps. In hospital, these include preventive antibiotics around the time of surgery, early debridement of open fractures and strict sterile technique. As a patient, you can help by:
- stopping smoking before surgery and throughout recovery
- keeping blood sugar well controlled with your doctor if you have diabetes
- eating a balanced diet with enough protein
- keeping the dressing clean and dry as advised, and not touching the wound
- attending follow-up appointments and reporting new symptoms early
When should you see a doctor?
If you have had fracture surgery, contact your surgical team without waiting for your next appointment if you notice:
- spreading redness, increasing swelling or warmth around the wound
- discharge that lasts more than a few days, or is cloudy or smells unpleasant
- the wound opening, or a new draining hole in the skin
- a temperature above 38 °C, shivering or feeling generally unwell
- pain that is getting worse instead of better, or that returns months later
- a feeling of movement at the fracture or a new deformity
Bone and soft tissue infections are among the medical interests of Prof. Dr. Halil İbrahim Balcı.
Key points
- A fracture-related infection affects the bone and the fixation hardware; it can appear early or years after surgery.
- The biofilm that bacteria form on implants means surgical cleaning is often needed alongside antibiotics.
- Diagnosis relies on clinical findings, blood tests, imaging and, above all, deep tissue samples.
- Whether the implant is retained, exchanged or removed depends on timing, implant stability and fracture healing.
- Seeking help early widens the options; results vary from person to person.
Frequently Asked Questions
No. In the first days after surgery, mild redness along the stitch line and a small amount of clear ooze can be normal. Redness that keeps spreading, a wound that feels hot, increasing pain, discharge that continues or turns cloudy, and fever should be assessed for infection. If you are unsure, taking a photograph of the wound and contacting your team can be helpful.
Yes. Some infections are caused by low-virulence organisms that progress quietly and only produce symptoms months or years later. The signs are often subtle: persistent pain at the fracture, a small opening that drains on and off, recurrent swelling or a loosening implant. Even if your operation was a long time ago, these symptoms are worth having assessed by an orthopaedic surgeon.
Not always. In some infections that are recognised early and where the implant is stable, it can be left in place with surgical cleaning and antibiotics until the fracture heals. If the implant has loosened or broken, or the infection has been present for a long time, exchange may be needed. Once the fracture has healed, removing the implant is often one of the options considered.
It depends on the organism, whether the implant has been retained and the surgery performed, and it often lasts weeks and sometimes months. Treatment usually starts through a drip and may continue as tablets when appropriate. The plan is made jointly by the orthopaedic team and an infectious disease specialist. Even if you feel well, it is important not to stop antibiotics without talking to your doctor.
Yes. Infection can recur, particularly when it has been present for a long time, has caused bone loss, or when risk factors persist. For this reason follow-up after treatment is usually long, with reviews of symptoms, blood tests and X-rays. Stopping smoking and keeping diabetes well controlled are steps that help reduce the risk of recurrence over the longer term.
This article is for general information only and does not replace a medical examination, diagnosis or treatment. Treatment options and outcomes vary from person to person.
Related treatment area Revision Surgery for Complex and Infected Nonunion